The Model S1900 is designed exclusively for the Commercial and Industrial
sectional overhead door market. It is constructed using foamed-in-place
polyurethane insulation that creates a strong monolithic panel that is energy
Each Model S1900 is secured with standard 14 gauge galvanized steel hinges. The
interior skin of each section has two continuous horizontal 20 gauge
reinforcing strips. The section joint is thermally broken and chemically sealed
and bonded for added weather resistance a with unique polyethylene adhesive
(51mm) thick polyurethane insulation
Galvanized Steel Hinges
Paint and Hardware Warranty
in brown or white
25"X12" oval acrylic window
20"x5" oval acrylic window
24"x12" (609.6mm x
Lites - 20" x 5" Double insulated acrylic
with EPDM rubber gasket; 25" x 12" Double insulated acrylic with
EPDM rubber gasket; Thermal Windows/Insulated Glass 24" x 12"
Molded plastic frame with insulated glass. Insulated glass window unit
consists of two pieces of 1.8" clear glass with a 7/8" aluminum
spacer. Aluminum fullview section available with single and dual glazing. Finishes
include mill finish or 201-R1 clear satin anodized or white electrostatic
alloy baked on polycron #3.
Cycle Springing - 25,000, 50,000 or
100,000-cycle torsion springs available.
- Locks - Outside keyed end stile lock. A 5-pin cylinder lock with
interior lock bar and outside key is available.
- Weather-stripping - Perimeter seal for header and jambs is optional.
- Track - Hi-lift, vertical-lift, low headroom, and follow-the-roofline
track is available.
Port - To allow the release of fumes, exhaust ports
can be installed in bottom sections. Tubes by others must be used from